THE DRYING PERFORMANCE AND POST-DRYING QUALITIES OF Eucalyptus saligna EXPOSED TO INTERMITTENT AND CONTINUOUS DRYING
DOI:
https://doi.org/10.59465/ijfr.2020.7.1.43-57Keywords:
Eucalyptus saligna, drying performance, drying defects, intermittent drying, continuous dryingAbstract
Eucalyptus saligna tends to develop defects during its drying process, thus limiting its use as construction or furniture material. Intermittent drying, which applies non-heating phases between heating phases, has the potential to overcome this issue. This study evaluated the effects of 3 intermittent and 1 continuous schedule on the species’ drying performance and post-drying qualities. The results showed that the boards from all intermittent schedules exhibit significantly slower drying rates (from -9.4x10-3 /hour to -1.57 x10-2 /hour) than those from the continuous schedule (from -5.12 x10-2 /hour to -1.03 x10-2 /hour). The intermittently-dried boards also developed lower collapse depth (1.162-2.032 mm) than the continuously-dried boards (5.12 mm). Nevertheless, applying higher temperature than that used in the continuous schedule, during the heating phase of the intermittent schedule, potentially increased the moisture gradient, residual drying stress, end check length, internal check percentage, and spring depth.
Downloads
References
Allaf, K., Mounir, S., Negm, M., Allaf, T., Ferrasse, H., & Mujumdar, A. (2014). Intermittent Drying. In A. Mujumdar (Ed.), Handbook of Industrial Drying (Vol. 4th, pp. 491–501). CRC Press. DOI : https://doi.org/10.1201/b17208-25
Arias-Aguilar, D., Briceño-Elizondo, E., Calvo, M., Guevara-Bonilla, M., Valverde-Otárola, J., Esquivel-Segura, E. ., & Arias-Ceciliano, K. (2018). Growth, carbon and nutrients dynamics in Eucalyptus saligna Sm. and Eucalyptus teriticornis Sm. short rotation plantations in the highlands of Costa Rica. In Proceedings of Energy and Sustainability for Small Developing Economies (ES2DE) (pp. 1–8). DOI : https://doi.org/10.1109/ES2DE.2018.8494323
Beltrame, R., Mattos, B., Haselein, C., Santini, E., Gatto, D., & de Cademartori, PHG Pedrazzi, C. (2013). Evaluation of longitudinal residual strain of Eucalyptus saligna Smith. wood. Scientia Forestalis, 41(97), 95–101. Retrieved from https://www.ipef.br/publicacoes/scientia/nr97/cap10.pdf
Couceiro, J., Vikberg, T., Hansson, L., & Morén, T. (2016). In situ CT-scanning of checking and collapse behaviour of Eucalyptus nitens during drying. In Proceedings of the 59th International Convention of Society of Wood Science and Technology (pp. 9–15). Curitiba, Brazil. Retrieved from https://www.diva-portal.org/smash/get/diva2:1070722/FULLTEXT01.pdf
de Castro, V., Braz, R., Azambuja, R., Loiola, P., Iwakiri, S., & Mato, J. (2015). Paineis cimento-madeira de Eucalyptus saligna com diferentes aditivos quimicos e metodos de formacao. Floresta, 45(2), 349–360. DOI : http://dx.doi.org/10.5380/rf.v45i2.35765
Elaieb, M., Ayed, S., Ouellani, S., Khouja, M., Touhami, I., & Candelier, K. (2019). Collapse and physical properties of native and pre-steamed Eucalyptus camaldulensis and Eucalyptus saligna wood from Tunisia. Journal of Tropical Forest Science, 31(2), 162–174. DOI : https://doi.org/10.26525/jtfs2019.31.2.162174
Golmohammadi, M., Foroughi-dahr, M., Rajabi-hamaneh, M., Shojamoradi, A., & Hashemi, S. (2016). Study on drying kinetics of paddy rice: intermittent drying. Iranian Journal of Chemistry and Chemical Engineering, 35(3), 105–117. DOI :https://doi.org/http://www.ijcce.ac.ir/article_22064.html
Luís, R., Nisgoski, S., & Klitzke, R. (2018). Effect of steaming on the colorimetric properties of Eucalyptus saligna wood. Floresta e Ambiente, 25(1), 2-6. DOI : https://doi.org/10.1590/2179-8087.101414.
Park, H., Han, W., Kang, H., & Yoo, W. (2017). Drying characteristics of soybean (Glycine max) using continuous drying and intermittent drying. In Proceedings of the International Food Operations and Processing Simulation Workshop (pp. 8–15). Retrieved from http://www.msc-les.org/proceedings/foodops/2017/FOODOPS2017_8.pdf
Passarini, L., & Hernandez, R. (2016). Effect of the desorption rate on the dimensional changes of Eucalyptus saligna wood. Wood Science & Technology, 50, 941–951. DOI https://doi.org/10.1007/s00226-016-0839-8
Phonetip, K. (2018). Investigating optimized drying methods for Eucalyptus delegatensis using a solar kiln (Doctoral dissertation). University of Melbourne. Retrieved from http://hdl.handle.net/11343/212529
Takougnadi, E., Boroze, T., & Azouma, O. (2018). Development of an intermittent drying process of onion. Cogent Food & Agriculture, 4(1), 1-15. DOI: https://doi.org/10.1080/23311932.2017.1422225
Yang, L., & Liu, H. (2018). A review of Eucalyptus wood collapse and its control during drying. BioResources, 13(1), 2171-2181. Retrieved from https://ojs.cnr.ncsu.edu/index.php/BioRes/article/view/BioRes_13_1_Yang_Review_Eucalyptus_Wood_Collapse_Drying/5878
Yuniarti, K., Ozarska, B., Brodie, G., Harris, G., & Waugh, G. (2015). Collapse development of Eucalyptus saligna under different drying temperatures. Journal of Tropical Forest Science, 27(4), 462–471. Retrieved from https://info.frim.gov.my/infocenter_applications/jtfsonline/jtfs/v27n4/462-471.pdf
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Indonesian Journal of Forestry Research
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
All articles published in Indonesian Journal of Forestry Research (IJFR) are licensed under the terms of the Creative Commons Attribution International License (CC BY-NC-SA 4.0) with CC BY-NC-SA 4.0 being the latest version.
Indonesian Journal of Forestry Research (IJFR) (ISSN Online: 
